Connect your old TV antenna into the antenna in on the digital converter box. It's the coax screw on connector. You may have to purchase an adaptor if your antenna wires doesn't have a coax connector.

• Step 2
  

  Take the TV output from the converter box into the back of your TV. Using the RCA cables (red white and yellow) or the coax cable out.

• Step 3
  

  You will need to set the TV onto either the AV (input, TV/Video or device) setting that you connected into if you connected with the RCA cables. If you connected with the coax type cable, you will need to have the TV set to channel 3 or 4 depending on the box.

• Step 4

  Program the converter remote control to work with your TV (instructions are included with converter) You will be able to change volume, channels & power on your TV using one remote.